1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

Quality metric for Mechanical Concept design/development

Discussion in 'ISO 9001:2015 - Quality Management Systems' started by Deevakar, May 3, 2018.

  1. Deevakar

    Deevakar New Member

    Joined:
    May 3, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Hi,
    We are working on the mechanical concept design/development for our product and my question is about the appropriate "Quality Metric" to measure the quality of the concept design deliverable. Can any one please comment/suggest?

    Thanks,
    Deevakar
     
    Deevakar, May 3, 2018
    #1
  2. Andy Nichols

    Andy Nichols Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    4,944
    Likes Received:
    2,485
    Trophy Points:
    112
    Location:
    In the "Rust Belt"
    When working through the 3 (typical) phases of product development, the various solutions which were developed were always tested and verified against the target specification. In the concept design phase, there may be a number of potential solutions which might be further developed, and these should be tested against a (basic) specification and then reviewed. Scores can be attributed to each of the specifications to provide an overall score.
     
    Andy Nichols, May 3, 2018
    #2