Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

PSW signed off by the customer

Discussion in 'APQP and PPAP' started by surfista, Jun 20, 2017.

  1. surfista

    surfista New Member

    Joined:
    Jun 20, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Can anyone help me to understand if PSW must be mandatory to be signed by the Customer.
    on the general PSW Ford template bottom side starts as:
    FOR CUSTOMER USE ONLY (IF APPLICABLE)

    how do we read (IF APPLICABLE)

    is it a open field where customer will sign it or might not?

    Give me your best thoughts on it.

    Regards
     
  2. johnnymo77

    johnnymo77 Member

    Joined:
    Sep 1, 2015
    Messages:
    48
    Likes Received:
    12
    Trophy Points:
    7
    Location:
    Niles Michigan
    My understanding is that if you are Level 1 you do not need customer signatures, unless there are Appearance items.

    Level 3 & 5 require STA signature.

    Level 3 & 5 require PD signature if you are a Priority supplier for the part/program.

    Make sure you are using the most recent form from May 2013.

    They also have their Ford Phased PPAP Requirements Handbook put out by the STA group that is very detailed.
     
  3. G650ER

    G650ER New Member

    Joined:
    Feb 22, 2019
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    You might also check for such details in the Ford CSR supplement, most US based OEMs have such CSRs
     

Share This Page