Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

IATF16949:2016 8.6.2 v.s 9.2.2.4

Discussion in 'IATF 16949:2016 - Automotive Quality Systems' started by WEIJU, Sep 18, 2019.

  1. WEIJU

    WEIJU New Member

    Joined:
    Aug 30, 2019
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Japan
    Good day,
    Could anyone explain how do implement 8.6.2 Layout inspection and functional testing and 9.2.2.4 Product audit?

    Now, my team is trying to revise 2 clauses above.
    According to FAQ 21&22, it seems
    layout inspection → dimensional requirements
    functional testing → performance and material measurements
    product audit→ dimensional, performance and material requirements, packaging & labelling requirement.

    Are these inspection/ testing/ audit repeated?

    Thanks.
     
  2. Andy Nichols

    Andy Nichols Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    3,671
    Likes Received:
    1,855
    Trophy Points:
    112
    Location:
    In the "Rust Belt"
    Audit is NOT synonymous with inspection and test. Inspection and test are a function of Control Planning and the relevant FMEA. Audits are planned events to confirm (or not) compliance with requirements. Product audits don't simply look at product. They look at many other aspects, such as handling, packaging, labeling etc which (may) come after product has been inspected and tested to the CP requirements.
     
    Güven Abi likes this.

Share This Page