Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

AS9100 D: Section 9.3.2 part C5: Calibration Status as part of Management Review?

Discussion in 'AS 91XX - Aerospace Quality Standards' started by peter rajewski, Jul 19, 2019.

  1. peter rajewski

    peter rajewski New Member

    Joined:
    Jul 19, 2019
    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    2
    In section 9.1 monitoring measurement and analysis it states that the organizations shall determine what needs to be monitored measured and evaluated.

    Then in Section 9.3.2 part C5 it states that the management review should show the results of the monitoring and measurement results.

    Our company was NCR'd for this by the AS9100 auditor. His position is that this applies to the calibration system and that we should have a section on the calibration status in the company as part of the upper management review. Thoughts ?? Comments??
     
  2. Andy Nichols

    Andy Nichols Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    2,939
    Likes Received:
    1,520
    Trophy Points:
    112
    Location:
    In the "Rust Belt"
    He's totally wrong! Appeal the finding back to the CB.
     
  3. peter rajewski

    peter rajewski New Member

    Joined:
    Jul 19, 2019
    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    2
    Thanks Andy that is what I thought too.
     
    Andy Nichols likes this.
  4. tony s

    tony s Well-Known Member

    Joined:
    Sep 10, 2015
    Messages:
    979
    Likes Received:
    739
    Trophy Points:
    92
    Location:
    Laguna Philippines
    Clause 9.1 doesn't apply only to the monitoring and measuring resources. It applies to everything that is necessary to be monitored and measured. Can you share the NCR description with us?
     

Share This Page