Hi, why not, as part of a regular method of working, measure a reference artefact/s with known quantities and plot these quantities on an...
Hi Joel, The aspects you are referring to are fundamental to good metrology practice. This link www.npl.co.uk/resources/gpgs will give you...
Hi, Can you send the data over, impossible for anyone to answer really without looking at what you have. Thanks
Hi Rich, Thanks for them clarifications. I understand that you want to use an uncertainty interval in order that you provide some confidence in...
Hi Richard, Is there a specification for the weight of the contaminant left.....as small as possible I know!? I'm assuming that your study is...
Hi Colin, I attach a link to a paper which describes how natural variation really works in effect. There is no magic bullet here but essentially...
Hello Hopech, Your questions are very broad ranging for a subject which can be quite complex. If you are starting from ground zero MSA involves a...
Total Variance Equation - Your process output is not one variance, but a sum of many. The output of any process is the interaction and summation...
Hi David, As usual in metrology, the answer to your question is not straightforward. I am assuming that you are working in inches, so you are...
Hi AxelR, Yes, the common approach is to apply percentages as a form of an insurance policy to provide confidence for the ability of the...
1) If you have let's say 10 x 0-1" micrometers and they are all from the same manufacturer and calibrated you may then be justified in saying that...
I am sure that you are aware that in order to answer this question will require your organisation to adequately understand their own requirements...
I think its maybe a play on the word "major". The important thing to say is that a stable process which is on target is displaying that it only...
Dear Pongsakorn, If the process you have described in stable (many people read off and quote capability indexes when the process is not) then for...
Thanks for sharing the above, here is an insight of my own. When trying to answer the question of whether a measurement process is adequate to be...
Hi, im not sure if you are in the process of doing it but would it be possible to see your raw data and any charts which your software is...
Hi, Ok, what follows makes some assumptions about your data but hopefully will give you a steer on the best way of doing this. The first thing I...
Separate names with a comma.