1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

IATF 16949 - Clause 7.1.5.3.2 - External Laboratory

Discussion in 'IATF 16949:2016 - Automotive Quality Systems' started by Steve Thomas, Jan 29, 2019.

  1. Steve Thomas

    Steve Thomas New Member

    Joined:
    Jan 29, 2019
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Hi,

    Has anyone come across looking for a external laboratory that are accredited to ISO 17025 for the testing of Rubber Hardness testers / Durometers, Test Blocks etc?

    I have contacted a number of potential calibration suppliers, but none of which calibrate it to that standard?

    The only other option is to Verify their capability against the Internal Laboratory requirements?

    Has anyone come across this before during an internal audit?
     
    Steve Thomas, Jan 29, 2019
    #1
  2. Andy Nichols

    Andy Nichols Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    5,205
    Likes Received:
    2,599
    Trophy Points:
    112
    Location:
    In the "Rust Belt"
    A quick Google of "Durometer calibration" revealed quite a few results, in the USA. Which country are you in?
     
    Andy Nichols, Jan 29, 2019
    #2
  3. Steve Thomas

    Steve Thomas New Member

    Joined:
    Jan 29, 2019
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    United Kingdom.
     
    Steve Thomas, Jan 29, 2019
    #3