1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

Search Results

Search Again
Page 1 of 3
  1. RonR Quality Pro
    Post

    IATF 7.1.5.1.1 Measurement system analysis (Visual Inspection)

    Bev please see my response to Miner......I don't disagree with you that visual inspection is NOT a truly effective method of detection. I...
    Post by: RonR Quality Pro, Nov 9, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  2. RonR Quality Pro
    Post

    IATF 7.1.5.1.1 Measurement system analysis (Visual Inspection)

    Absolutely agree Miner - there are a number of variables which will influence the effectiveness of visual inspection. The '80%' figure is a 'best...
    Post by: RonR Quality Pro, Nov 9, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  3. RonR Quality Pro
    Post

    IATF 7.1.5.1.1 Measurement system analysis (Visual Inspection)

    Bev: Although I hesitate to disagree with your first statement that 80% effectiveness is a zombie myth, there have been studies performed which...
    Post by: RonR Quality Pro, Nov 8, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  4. RonR Quality Pro
    Post

    8.5.1.1 Control Plan - questioning audit NC

    I too have used TPM to manage and control temporary process changes, and was questioned once about it. When I discussed with my auditor (who was...
    Post by: RonR Quality Pro, Nov 3, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  5. RonR Quality Pro
    Post

    Preparing for the ASQ CQE exam

    I wrote the CQE in 2009 (or sometime around there), and didn't find it too difficult at all. A few key points of advice i will give you which may...
    Post by: RonR Quality Pro, Oct 3, 2023 in forum: ASQ, IRCA, IATF, Exemplar & Related Organizations
  6. RonR Quality Pro
    Post

    Quality Department Development

    Absolutely agree with Miner. Detecting the problems AFTER the occur means you have wasted time, money, raw materials, other resources, AND there...
    Post by: RonR Quality Pro, Sep 29, 2023 in forum: Other Quality and Business Related Topics
  7. RonR Quality Pro
    Post

    Internal Audit NC - HR process

    I agree with Golfman. Writing the NC against the HR department because they couldn't find a suitable candidate would not be very effective. Better...
    Post by: RonR Quality Pro, Sep 12, 2023 in forum: ISO 9001:2015 - Quality Management Systems
  8. RonR Quality Pro
    Post

    Help with Internal Audits based on ISO9001:2015

    I agree with Andy (at least, my interpretation of what he said). To add any kind of a 'scoring' system to the internal audits is (IMHO) of no real...
    Post by: RonR Quality Pro, Jul 27, 2023 in forum: ISO 9001:2015 - Quality Management Systems
  9. RonR Quality Pro
    Post

    New update on Control Plan elements

    Just a point of clarification - there is no requirement that documents be REVISED - only that they are REVIEWED......the distinction is important....
    Post by: RonR Quality Pro, Jul 5, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  10. RonR Quality Pro
    Post

    How long is a piece of…

    Depends on the process being audited.......something fairly straightforward (corrective action as an example) is fairly quick - an hour or so is...
    Post by: RonR Quality Pro, Jul 5, 2023 in forum: ISO 19011 - Auditing Management Systems Guidelines
  11. RonR Quality Pro
    Post

    Appealing already accepted corrective action.

    I agree with Golfman - whether or not the NC is 'valid', you cannot just ignore it. That will DEFINITELY lead to a significant NC during the next...
    Post by: RonR Quality Pro, Jun 8, 2023 in forum: ISO 9001:2015 - Quality Management Systems
  12. RonR Quality Pro
    Post

    Instant measurement machine calibration

    I would suggest going with a few gauge blocks and ring gauges to demonstrate the ability of the equipment to correctly measure a feature. However,...
    Post by: RonR Quality Pro, Feb 14, 2023 in forum: Gage Calibration and Uncertainty
  13. RonR Quality Pro
    Post

    Questions regarding conformance to work instructions and specifications ISO9001/IATF16949

    Although you are correct in the strictest interpretation of the rules, in this specific case, the requirement for rejection (>5 units detected) is...
    Post by: RonR Quality Pro, Feb 10, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  14. RonR Quality Pro
    Post

    Questions regarding conformance to work instructions and specifications ISO9001/IATF16949

    There is no noncompliance. If a supplier chooses to reduce a tolerance that (in theory) will result in you the customer being less likely to...
    Post by: RonR Quality Pro, Feb 9, 2023 in forum: IATF 16949:2016 - Automotive Quality Systems
  15. RonR Quality Pro
    Post

    Die cleaning - Forming

    Russel: Need some more information on your process. What is it that you are forming? What is the material that you are forming? Where does the ink...
    Post by: RonR Quality Pro, Jan 27, 2023 in forum: Manufacturing and Related Processes
  16. RonR Quality Pro
    Post

    Lessons learned database

    Speaking from painful experience, do NOT make it complex.....make it as simple as possible. My experience has been that the document will be...
    Post by: RonR Quality Pro, Dec 6, 2022 in forum: ISO 9001:2015 - Quality Management Systems
  17. RonR Quality Pro
    Post

    Traceability of electronic components mounted on PCB

    I am (fortunately) not in that position where i am recording that amount of information, however if i WAS, then i would definitely be using a...
    Post by: RonR Quality Pro, Nov 28, 2022 in forum: Other Quality and Business Related Topics
  18. RonR Quality Pro
    Post

    Calibration frequency

    I agree with Miner that these are (probably) not instruments which require calibration, but instead should be on a PM schedule. But lets look at...
    Post by: RonR Quality Pro, Nov 11, 2022 in forum: IATF 16949:2016 - Automotive Quality Systems
  19. RonR Quality Pro
    Post

    How to evaluate the effectiveness of actions to address these risks and opportunities

    This section deals with planning, risk identification, and the steps which are taken to mitigate risks which are identified. As an example, the...
    Post by: RonR Quality Pro, Oct 19, 2022 in forum: ISO 9001:2015 - Quality Management Systems
  20. RonR Quality Pro
    Post

    Record retention - First offs

    My past practice has been to retain parts until the end of run (do a FO/LO comparison) or at most until the next FO. Records are retained for the...
    Post by: RonR Quality Pro, Oct 14, 2022 in forum: IATF 16949:2016 - Automotive Quality Systems
Showing results 1 to 20 of 54 Next >
Search Again
Page 1 of 3