1. Hello and Welcome to The Quality Forum Online...Continuing in the spirit of People Helping People !
    Dismiss Notice
Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

Calibration Certificate Verification

Discussion in 'ISO 17025 - Calibration and Test Laboratories' started by Tedi2277, Dec 22, 2017.

  1. Tedi2277

    Tedi2277 New Member

    Joined:
    Dec 22, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    While reviewing a calibration certificate, I saw that the person that calibrated the instrument is also the person who approved and signed as the Quality Manager.

    • Is this against regulation...if so what regulation?
     
  2. Andy Nichols

    Andy Nichols Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    1,970
    Likes Received:
    1,025
    Trophy Points:
    112
    Location:
    In the "Rust Belt"
    No. Some labs might only have a few people so the ISO/IEC 17025 requirements have to allow for many hats to be worn. Do you have a problem with it being the same person?
     
  3. Anthony Salim

    Anthony Salim New Member

    Joined:
    Mar 15, 2018
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    In the 2017 Version, there's no regulation that stated that the "quality manager" may not do a calibration.
     

Share This Page