1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
You must be a registered member in order to post messages and view/download attached files in this forum.
Click here to register.

R & R gauges on control plan

Discussion in 'IATF 16949:2016 - Automotive Quality Systems' started by russell nugent, Mar 2, 2022.

  1. russell nugent

    russell nugent Active Member

    Joined:
    Mar 1, 2022
    Messages:
    70
    Likes Received:
    12
    Trophy Points:
    7
    Good afternoon , I am looking for some advice on the type of R & R studies to cover MSA on devices on a control plan . See devices below , any advice would be appreciated.

    Densitometer
    Hegman gauge
    Viscometer
    Tension meter
    Positector
    Callipers
    Haze meter
    Flatness check
    Pin gauge
    Moisture analyser
     
    russell nugent, Mar 2, 2022
    #1
  2. Bev D

    Bev D Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    606
    Likes Received:
    664
    Trophy Points:
    92
    Location:
    Maine
    Welcome Russell! You can check out my paper on MSA Validation and Verification in the “Practical Quality Engineering Resources” in the resources section. There are other papers there that might help you. Also check out Miner’s blogs on R&R…
     
    Bev D, Mar 2, 2022
    #2
    Andy Nichols, RonR Quality Pro and russell nugent like this.
  3. Miner

    Miner Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    577
    Likes Received:
    493
    Trophy Points:
    62
    Location:
    Greater Milwaukee USA
    I can tell that at least some (e.g., viscometer, moisture analyzer) of your studies will be non-replicable studies and may be done using split specimens.

    My MSA blog that Bev D mentioned.
     
    Miner, Mar 2, 2022
    #3
    Andy Nichols and russell nugent like this.
  4. russell nugent

    russell nugent Active Member

    Joined:
    Mar 1, 2022
    Messages:
    70
    Likes Received:
    12
    Trophy Points:
    7
    I will check that out this afternoon . Much appreciated.
     
    russell nugent, Mar 3, 2022
    #4
  5. russell nugent

    russell nugent Active Member

    Joined:
    Mar 1, 2022
    Messages:
    70
    Likes Received:
    12
    Trophy Points:
    7
    Profound Statistical Concepts 2016-11-08 , Is this correct one.
     
    russell nugent, Mar 3, 2022
    #5
  6. Bev D

    Bev D Moderator Staff Member

    Joined:
    Jul 30, 2015
    Messages:
    606
    Likes Received:
    664
    Trophy Points:
    92
    Location:
    Maine
    If you scroll down from that article it is close to the bottom. MSA Verification and Validation
    there are other MSA articles including a spreadsheet that can perform the various calculations and graphs...
     
    Bev D, Mar 3, 2022
    #6
    Andy Nichols likes this.